Manitowoc Ice SD1472C Manual de usuario descargar pdf

KFC and Taco Bell Logo Application Instructions

Manitowoc Models S600C, S1470C

These instructions will help the location manager or machine installer to correctly center the urethane logo on the front panel of the

Manitowoc ice machine.

Tools Needed:

Philips head screw driver

Contents of Kit:

Small packet containing alcohol prep pad

Urethane logo

L-shaped static cling template

MODEL - SY0674C or SD0672C

Follow these instructions to remove the left section of the ice

machine front panel from the machine.

(1) If your machine is on a drink dispenser, remove the drink

dispenser ice bin cover.

(2) Remove the Philips head screw from lower section of the

front panel.

(3) Depress pin to release front panel.

Pictured: S600C

MODELS - SY1474C or SD1472C

Follow these instructions to remove the ice machine front panel

from the machine.

(1) If your machine is on a drink dispenser, remove the drink

dispenser ice bin cover.

(2) Remove the Philips head screw from lower section of the front

panel.

(3) Pull front panel away from machine while lifting slightly.

Manitowoc Ice, Inc.

2110 South 26

Street, P.O. Box 1720, Manitowoc, WI 54221-1720 USA 000002851

Telephone 920-682-0161, Fax - Sales: 920-683-7589, Service/Parts: 920-683-7585, Other: 920-683-7879 Rev 01

Web Site - www.manitowocice.com 5/25/10

1 2 3

KFC and Taco Bell Logo Application Instructions Manitowoc Models S600C, S1470C These instructions will help the location manager or machine

MODEL - SY0684C or SD0672C MODELS - SY1474C or SD1472C 1. Place the panel on a flat, horizontal surface with the stainless steel side (exterior) fac

8. When the semi-transparent masking and logo are in place, apply pressure against the top of the masking, working out any visible air bubbles. R

Sin comentarios

Manitowoc Ice SD1472C Manual de usuario