Manitowoc Ice K00119 Manual de usuario descargar pdf

K00119 BIN DEFLECTOR KIT

Installation Instructions

NOTE: This kit will convert a C-900/C-950 bin to a C-970 bin or a C-910/C-960 bin to a C-980 bin. This kit is also used

on Manitowoc F-style bins, when stacking Q-1300/1600/1800 ice machines.

1. Remove the gasket material along the front and both sides of the bin.

2. Remove the #8 screws holding the current ice deflector. Save these screws – a total of six from a C-900/C-910; a total

of eight from a C-950/C-960.

3. Remove the ice deflector.

4. Place new ice deflector in position and use the slots in the side flanges as guidance to drill four 1/8” holes.

5. Fasten the ice deflector using the screws removed in step 2 for the front and the four supplied screws, two each side,

for the side flanges. NOTE: C-900/C-910 only – use additional two screws, shipped with the new ice deflector, on

the front.

6. Install the new gasket material along the front and sides of the bin.

Manitowoc Ice, Inc.

2110 South 26

Street, P.O. Box 1720, Manitowoc, WI 54221-1720 USA

Telephone 920-682-0161, Fax - Sales: 920-683-7589, Service/Parts: 920-683-7585, Other: 920-683-7879 8010253

Web Site - www.manitowocice.com Rev. 06/13/03

Ice Machine Back

Supplied Screws

Drill 1/8” Holes

Both Sides

(See Step 4)

New Deflector

Supplied Screws

24” Gasket

Both Sides

48” Gasket

K00119 BIN DEFLECTOR KIT Installation Instructions NOTE: This kit will

Sin comentarios

Manitowoc Ice K00119 Manual de usuario